A Few Differences Between Diesel Locomotive Cable and Welding Cable
Is there a big difference between DLO cable and welding cables? Both are single conductor cables but that is about where the similarities end. Diesel locomotive cable is available from 10 awg up to 777.7 MCM. This cable is approved for use up to 90 degrees Celsius and 2000 volt.
Primary uses include of course diesel locomotives as well as oil and gas rigs, automotive leads, mining and excavation equipment and boatyards. There is usually an inner insulation as well as outer jacket which affords tremendous impact and abrasion resistance.
Welding cable is for the most part made in 6 awg up to 500 MCM. Although not generally as rugged as dlo cable, welding cable is also used in instances where power generation is needed. Most folks use this cable if they need to power generators or similar type equipment. This cable is usually approved for use to 600 volts and 90 degree Celsius. When you are going to be in a situation where the cable will get beat up, DLO cable would be the better option.
With that in mind it should be a little more simple for you to make your choice and pick the correct cable for your needs. When going with diesel locomotive cable over welding cable you can be confident that even though it may be a bit of overkill, you should not have to be concerned about the possibility of the cable failing while under load. It may be a bit more expensive up front for the DLO, but if your cable fails all the time and you have to keep replacing it, what will that ultimately cost between product and the labor to do the work.
Delco Wire and Cable stocks both types of cable in all gauge sizes. We do not charge to cut to (your specific length|length for you} and there are no minimum orders. You can view specifications for the DLO cable and for the welding cable at delcowire.com. Please also feel free to call us at 800-714-9473 should you have any questions. Our staff has many, many years of experience and will be able to guide you in the right direction and help you pick the cable that best suites your needs.
If you enjoyed this post, make sure you subscribe to my RSS feed!
| Published on April 6th, 2011 | | No Comments | | Posted by admin |